Recaro Pole Position / SPG Belt Guide Set 7203493

Fits without modification

Made for the harness slots on Recaro Pole Position and Professional SPG bucket seats, replacing OEM part 7203493. Each fairing is reverse-engineered from an original, so the slot aperture, shell curvature and screw spacing land exactly where the factory ones do. Drop-in — no trimming, drilling or shimming.

Looks right in the seat

The outer skin is real woven carbon fibre, not a printed pattern or a hydro-dipped film. The weave sits under the surface where it cannot wear off, and it reads as a deliberate upgrade against black shells, leather or Alcantara — closing the harness opening cleanly instead of leaving the raw slot on show.

Built to outlast the original

Factory fairings crack and fade. They sit at the top of the shell in direct sun, take a knock every time a harness is routed, and the original plastic embrittles with age until the slot corners split and the screw bosses let go.

Ours are built in two layers, each doing a different job. The core is PC-ABS — polycarbonate toughness blended with ABS impact resistance. Under a sharp load it flexes and returns instead of fracturing, and it holds its shape in a hot cabin, so the fairing stays flush against the shell instead of lifting at the edges. Over that core sits a woven carbon fibre skin, which stiffens the panel against flex, spreads load away from the slot corners where the original cracks, and resists the fine scratching that belt webbing works into softer plastics. Strength and appearance from the same layer — nothing painted on, nothing to peel.

What you get

A matched pair of outer, door-side fairings — left and right. Mounting screws are included so the set goes straight on without sourcing hardware separately. The inner caps are not part of this set.

Who makes it

Rigid Custom Works engineers replacement parts for cars the factory has stopped supporting. Every part starts from a measured original, gets redesigned around the failure point rather than copied with the flaw intact, and is produced in-house in Dubai under our own quality control.